不透鋼1.4313是馬氏體級，耐的結垢高朝，熱加工補救后耐用性好。X3CrNiMo13-4鋼的機戒能是可能化學上化學物質中鉬和鎳的高量。他們硬質合金更改劑禁止了加劇級碳量的必須 ——給定有機廢氣濃度比較于奧氏體不透鋼。固然鎳量低，但鎳量約為4%，為顯著增加了鋼對多種多樣的結垢氛圍的對抗力——第二次機戒能。X3CrNiMo13-4鋼玩家可生孩子自由高達300℃在溫度下作業的配件加工和配件加工，和暴曬自己在多種多樣的結垢氛圍中的配件加工，還堅持一定的表皮前提括抗氯化物類別)。QT650.QT780和QT900前提下，熱加工補救后里常交貨方鋼管。半樣品用在原油生孩子.化工行業內.在冶金機械和生物質節能環保行業內，渦輪機機暴曬自己在高濕潤超低溫下.泵.壓縮的機組件。鋼惡化的情況合焊接工藝。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50廠家直銷EN1.4313馬氏體不繡鋼具有著退火處理特征參數（+A）狀況、蘸火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，要哪另一個一定程度要跟工作說清析哦。